Manuale con il formato dei dati inviati via HTTP per ModBusEasy
In fase di definizione, molto probabilmente sarÓ simile a quello di MBusEasy, ovvero potrebbe essere come segue. 
With the ModBus Reading/Settings menu, you can enter the URL of your own script (must be standard http:// and for the default port, 80); either as or simply
Or or - any server programming language that can read a POST request in normal CGI standard is OK; the name of the script is your choice. 
The CGI parameters passed on are: 
webid (unique identifier; preset when ModBusEasy is assembled) 
rmt (remote mode: wifi or gsm; you may use it for display purpose) 
batt (battery charge in % - if less than 25 batteries must be replaced) 
rtim (current reading frequency in minutes) 
rtimset (if this is 1, a end user has just changed the reading frequency, locally) 
err (errors, if any, in plain text) 
f (the readings, in plain text as HEX to Ascii) 
The server MUST reply with a short text reply (any reply will be actually read as text; lines terminated by LF), in this format: 
This is a message (one line) that will be shown to the end user if present. 
OK data saved 
2019-03-31 10:11 (the current UTC/GMT time, used to adjust the internal Clock) 
2019-03-31 10:11 (last reading time; or can be a empty line) 
2019-03-31 10:11 (last correct reading time; or can be a empty line) 
360 (reading frequency for next reading, in hours) 
(empty line) 
(empty line) 
0 (summer mode) 
(empty line) 
(empty line) 
(empty line) 
(empty line) 
(empty line) 
(empty line) 
Manuale collegamento e comandi seriali per 8888-Display (sei qui!) 
Manuale collegamento e comandi WiFi per 8888-Display 
Manuale collegamento e comandi ModBus per 8888-Display RS485 ModBus 
8888-Display per Raspberry Arduino ESP (pagina principale) 
Home page - Soluzioni Semplici - Home - L'hardware di VisualVision 
(C) 2019 VisualVision